1:12 TYPE82E VOLKSWAGEN VW KOMMANDEURWAGEN BEETLE
Introduction:
Get ready for off-road adventures with the KdF-Wagen RC car. Known as the “people’s car,” this RC model is based on the exact same chassis as the Kübelwagen, a rear-mounted, rear-drive chassis with a limited-slip differential.
Featuring four-wheel independent suspension, rear portal axles, and front and rear axle planetary gear differentials, this RC car is ready to tackle any terrain. Its air-cooled horizontally opposed four-cylinder engine is powered by a 130 motor in each cylinder, and the cooling fan is driven by a belt for an authentic and realistic driving experience. The third channel of the remote control system controls the two-speed transmission, while the fourth channel allows you to switch between 4WD and RWD modes.
The KdF-Wagen RC car is loaded with features for a realistic driving experience. The servo-operated synchronized steering wheel and front wheels allow for precise control, and the openable doors have spring-loaded latches for a true-to-life feel. The realistic fabric soft rubber seats and openable front storage compartment hatch add to the authenticity of this RC car. The openable engine hatch allows you to get a closer look at the inner workings of the model. The excellent light function ensures you can drive day or night.
Learn more about its features:
1. Four-wheel independent suspension
2. Rear portal axles
3. Front and rear axle planetary gear differentials
4. Perfect restoration of Air-cooled horizontally opposed four-cylinder engine
5. 130 motor in the cylinder
6. Cooling fan driven by belt
7. The third channel for the two-speed transmission controls
8. The fourth channel for switch between 4WD-RWD Mode
9. Servo Operated Synchronized Steering Wheel and Front Wheels
10. Openable doors with spring loaded latch
11. Realistic fabric soft rubber seats
12. Openable front storage compartment hatch
13. Openable Engine hatch 14.Excellent light function
What in the box:
2.4G Transmitter x1
2 in1 ESC&Receiverx1
USB Charger x1
Battery 2S Lipo 7.4V 380mAhx1
Manualx1
Hex Wrench Socketx1
3Y 9g Digital Servo x3
130 Brushed Motor x1
WARM TIPS:
Manual: Read the ENTIRE instruction manual to become familiar with the features of the product before operating.
Charging: To maintain the stability condition of the battery, please remove it from the RC truck and turn off the truck when charging. Otherwise, it can damage the battery’s lifespan.
Overcharge & discharge: Do not over-charge or over-discharge the battery. If you are unsure of how to charge this battery, please seek the advice of experienced RC users.
Operating Note: Always turn on the transmitter before connecting the battery on the model. When turning off the model, always disconnect the battery first, and then turn off the model; always disconnect the battery first, and then turn off the transmitter. If this order is reversed, the model may become uncontrollable and cause severe damage.
Motor overheated: The motor will become hot during use. Allow 10-15 minutes between runs for the vehicle to cool down. Doing so will prolong the life of your vehicle.
Not use: When not in use, you must remove the battery of the remote and vehicle.
After-sales Service: If there are any functional problems with the product, please let us know. We always will do our best to find a solution to any issues you may have.


























